Using The Clipper; Care - Panasonic ER‑GP21 Operating Instructions Manual

Using the clipper

• Make sure that the clipper is turned off.
• The appliance may not operate in an ambient
temperature approximately 0 °C or lower.
1
1
Select the trimming heights indicated on
the insides and sides of the attachments.
2
2
Slide the power switch on the main body
to the " " position to turn on the clipper.
Removing and mounting the comb attachments
Mounting the attachment
(Example: in the case of
3 mm)
Slide the attachment until
it clicks.
Removing the attachment
Remove the attachment by
pressing with your thumb.
8
3mm
click

Care

• Do not use thinner, benzine, alcohol or other
chemicals. Doing so may cause failure, cracking or
discoloration of the main body. Clean the main body
only with a soft cloth slightly dampened with tap water
or soapy tap water.
Removing and mounting the blade
• Make sure that the clipper is turned off.
Removing the blade
Hold the clipper with the switch
facing upward and push the
blade with your thumb while
catching the blade in your
other hand.
Mounting the blade
Fit the mounting hook into the blade mounting on the
clipper and push in until it clicks.