Parts Identification; Charging The Clipper - Panasonic ER-GP30 Operating Instructions Manual

Parts identification

 
  






A Main body
1 Power switch [ / ]
2 Charge indicator lamp (
3 Appliance socket
B Blade
4 Mounting hook
5 Cleaning lever
6 Moving blade
7 Stationary blade
C 3 mm/6 mm comb
attachment
D 9 mm/12 mm comb
attachment
E 15 mm/18 mm comb
attachment
8
 






F AC adaptor (RE9-85)
8 Adaptor
) 9 Power plug
: Cord
; Appliance plug
Accessories
G Cleaning brush
H Oil

Charging the clipper

• Make sure that the clipper is turned off.
1
1
Insert the appliance plug
into the clipper.
2
2
Plug in the adaptor into a
household outlet.
• Charging is completed after
approx. 8 hours.
• Check the charge indicator lamp
( ) glows.
3
3
Disconnect the adaptor from the household
outlet when charging is complete.
(for safety and to reduce energy usage)
• The charge indicator lamp (
charging is complete. There is no indication to show that
"charging is complete".
Notes
• If there is crackling noise on radios or other devices while
charging, charge the clipper using a different household outlet.
• When the appliance is not used for 6 months or more, the battery
will weaken (leak battery fluid, etc.). Fully charge the battery
once every 6 months.
• When charging the clipper for the first time or when it has not
been in use for more than 6 months, the lamp on the main body
may not glow for a few minutes, or the operating time may
shorten. Please charge it for more than 16 hours in such cases.
• Recommended ambient temperature for charging is 0 °C – 35 °C.
Battery performance may decrease outside of the recommended
temperature.
• 1 full charge will provide approximately 40 minutes of continuous
operation.
2
2
1 1
) continues to glow after