HIKVISION HWI-D720H-V/-Z Quick Start Manual page 16

Network Dome Camera·Quick Start Guide
Note:
● The supplied screw package contains self-tapping screws,
and expansion bolts.
● For cement ceiling, use expansion bolts to secure the
camera. For wooden ceiling, use self-tapping screws
6. Connect the corresponding cables, such as power cord and
network cable.
7. Power on the camera, and set the network configuration (for
details, refer to 3 Setting the Network Camera over the LAN and 4
Accessing via Web Browser) to check whether the image is gotten
from the optimum angle. If not, adjust the surveillance angle (for
details, refer to 2.3.1 Angle Adjustment).
8. Install the bubble back to the camera and secure it with screws.
Secure the Camera
16