How To Use; Getting Started - George Foreman GFO200SSP Use And Care Manual

Indoor-outdoor grill for 12 servings
Table of Contents

Advertisement

Available languages

Available languages

HO W T O U SE
This product is for household use only.
GE T T IN G START E D
• Remove all packing material, any stickers, and the plastic band around the power plug.
• Remove and save literature.
• Please visit www.prodprotect.com/applica to register your warranty.
• Wash grill plate, drip tray and lid with warm, soapy water. Wipe dry.
Important: Do not immerse temperature control probe in water or any other liquid.
To clean, wipe with a damp cloth and dry thoroughly.
AS S EM B LY IN STRU C TIO N S
1. Assemble pedestal tube by connecting two halves of tube. Insert the tapered end
of the Upper Pedestal Tube into the top of the Lower Pedestal Tube and screw the
Tubes together.
2. Insert pedestal feet into pedestal base until they click into place. Place pedestal
base on a flat, level surface.
3. Insert slotted end of assembled pedestal tube into center hole of pedestal base
and push down firmly.
4. Align grill base with the grill base frame so that the screws holes align. Attach grill
base to grill base frame using a screwdriver and the included screws.
5. Place grill base on top of pedestal tube assembly, ensuring hole in center of grill
base engages with tube.
6. Place drip tray securely into position inside grill base.
7. Rotate grill base until the notch on the bottom of the grill plate is aligned with the
slot in the upper pedestal tube. Position grill securely on grill base. Attach clip
from upper pedestal tube to grill base.
8. Place lid handle onto the lid handle bezel and rotate until fully seated. Attach lid
handle assembly to lid from the inside using a screwdriver and the included screw
and washer. Place the washer inside the lid.
9. Place lid over grill. Your grill is now ready to use!
GRI LL I N G OU TD OORS
1. Turn temperature control probe to OFF position and attach securely into probe
receptacle.
2. Plug into standard electrical outlet. Align desired temperature setting with indicator
light. Place lid securely on grill. Allow grill to preheat to desired temperature – for
approximately 10 minutes.
3. Carefully remove lid and place food onto grill; cover for most foods. Cook until
done, turning at least once halfway through cooking time for most food. Adjust
temperature as needed.
Tip: Light on temperature control probe will cycle on and off as grill thermostat
maintains proper temperature. This is normal operation.
4

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gfo3320

Table of Contents