Advertisement
1. DISASSEMBLY
3. Remove the four screws
and pull out the rear cover
8. Remove the four screws
and remove the rear board
rear board
power board
7. Remove the six screws and the power
board then pull out 5 pin wire harness
and 3 pin cable
All manuals and user guides at all-guides.com
11. Remove the two screws and pull out the Tripod
5. Remove the six screws and the timing
board and pull all wire harness(4 pcs)
timing board
FPC
iris board
6. Remove the two screws and the iris
board then pull out 4 pin wire harness
− 2 −
1. Remove the four screws
and pull out the top cover
4. Remove the four screws
and pull out the front cover
and FPC on sensor board
2. Remove the four screws
and pull out the bottom cover
9. Remove FPC and the four screws
and remove the sensor board kit
sensor board
Anti-dusty Film
12. Remove the lens cap
10. Remove the two set screws
and unlock the lens adapter
Advertisement
