Table of Contents
Advertisement
② Power switch: To turn on or turn off the power.
③ Reset Key: Reset default configuration.
④ Ethernet Interface: To be connected to a PC network card by a network cable, also can use a crossover cable
⑤ Line Interface: Connected with phone line or "VDSL" port of the splitter.
1.3 LED STATUS INDICATION
Status
POWER
(green)
Steady
Power on
light
Flashing
/
Fast
/
flashing
Off
Power off
1.4 PROTOCOLS
VDSL Modem supports the following protocols:
PPPoA（PPP over ATM ） LLC encapsulation or VCMUX encapsulation
1.
2.
PPPoE (PPP over Ethernet) LLC encapsulation or VCMUX encapsulation
3.
1483 bridge（1483 Bridged IP over ATM）LLC encapsulation or VCMUX encapsulation (RFC1483)
4.
1483 routing（1483 Routing IP over ATM）LLC encapsulation or VCMUX encapsulation (RFC1483)
5.
Classical IP over ATM
1.5 FEATURES
1. Supports ANSI T1.413 ISSUE 2, ITU G.992.1(G.DMT), ITU G.992.2(G.LITE), ITU G.992.3, ITU G.992.5.
2. Web-based configuration and monitoring.
3. Supports up to 8 PVCs.
4. Routing function.
5. NAPT、DHCP function.
6. Software upgradeable.
7. ATM management function.
to connect to Hub, Switch or Router.
LINK (green)
DATA (green)
The modem is
PPP is on
in good
connection
No signal
/
In handshaking
Transmitting or
status
receiving data in PPP
mode
Power off
PPP is Off
Table 1.1
USB(green)
USB line is
connected
USB port transmit or
receive data
/
USB line not
connected properly
- 6 -
VDSL2
Modem User Manual
WiFi (green)
Wireless is connected
/
/
Wireless is not
connected
(RFC2364)
(RFC2516)
(RFC1577)
Advertisement
Table of Contents
