Table of Contents
Advertisement
On-Screen Display Manual
D-WDR (Digital Wide Dynamic Range):
A. Select D-WDR using the UP and DOWN
buttons on the EXPOSURE menu screen.
B. Select the desired feature by using the
LEFT and RIGHT buttons.
D-WDR : When there are both bright
and dark image areas, D-WDR makes
both of them distinct. User can
choose between OUTDOOR and
INDOOR settings.
OFF: Disable D-WDR function.
RETURN: Save changes in the
EXPOSURE menu and return to the
SETUP menu.
White Balance:
The White Balance function is used to control the on-screen colors.
1.
Select WHITE BAL on the SETUP screen using
the UP and DOWN buttons.
2.
Select the desired mode using the LEFT and
RIGHT buttons.
There are four White Balance settings available:
A. ATW (Auto Tracking White Balance):
Normal setting. The color temperature
range is from 1,800°~10,500° K. (Ex: A
fluorescent lamp or outdoors.)
B. AWB : The White Balance is
automatically adjusted to a specific
environment.
C. AWCSET: To obtain the best results,
press the SET button while the camera is
focused on white paper. If the
environment and/or light source changes,
the White Balance will require re-
adjustment.
D. MANUAL: Used for fine adjustment of
White Balance. Set White Balance using
ATW or AWC, then change to MANUAL
and press the SET UP button. Increase
or decrease the value of R-Gain (Red)
and B-Gain (Blue) while monitoring the
color of the image.
SECO-LARM U.S.A., Inc.
SENSE-UP
9
Advertisement
Table of Contents
