Ip 5mp full-color turret camera with wdr (8 pages)
Summary of Contents for SECO-LARM Enforcer EV-2125-N2WQ
Page 1
EV-2125-N2WQ (NTSC) EV-2125-P2WQ (PAL) Mini Vandal Dome Camera Manual ” Sony Super HAD II CCD Small 3” (76mm) diameter 2.9mm lens Weatherproof (IP65) 420 TV lines Vandal-resistant design Note: Model numbers that end with “Q” or that have a round green “Q” sticker signify RoHS-compliant products.
ENFORCER Mini Vandal Dome Camera Specifications: EV-2125-N2WQ EV-2125-P2WQ Type Ultra-Mini Vandal Dome Camera ” Sony Super HAD II Resolution 420 TV lines Lens size 2.9mm Pickup elements (HxV) 510x492 pixels 500x528 pixels Sync Internal Video output 1Vp-p composite video, 75Ω...
Page 3
ENFORCER Mini Vandal Dome Camera Overview: Camera Set screw Mounting base Dome cover Female BNC connector Wiring notch DC plug with terminal block DC jack Mounting screw Important: Do not cut DC jack or female BNC connector as warranty will be voided. Before Starting: 5.
ENFORCER Mini Vandal Dome Camera Troubleshooting: Check that the camera is powered up. Check that the power supply’s polarity is correct. The screen is blank. Check that the monitor is powered up. Check that the video cable connecting the camera to the monitor is connected properly.
Need help?
Do you have a question about the Enforcer EV-2125-N2WQ and is the answer not in the manual?
Questions and answers