Lens; Exposure - SECO-LARM EV-2806-NMMQ On-Screen Display Manual

Lens:

This function controls the brightness of the image.
1. Move the arrow indicator to LENS using the UP and DOWN buttons on the SETUP menu screen.
2. Select the desired lens type by pressing the LEFT and RIGHT buttons.
3. Press RETURN to return to the SETUP menu.
Note:
 When DC is selected from the SETUP menu, the brightness can be adjusted. The
brightness control range is 1~100.

Exposure:

This function is used to select Automatic or Manual shutter-speed control.
1. On the SETUP menu screen, select
EXPOSURE by using the UP and DOWN
buttons.
 SHUTTER: Select the desired shutter mode by
pressing the LEFT and RIGHT buttons.
A. FLK: Select FLK when flickering caused by
the unmatched frequency of electric lights
occurs.
B. SHUTTER SPEED: Choose between 1/60,
1/250, 1/500, 1/2000
Note:
To produce better results with FLK, do not use in conjunction with the D-WDR mode
in the BACKLIGHT menu.
Brightness can only operate when selected from Manual mode. When selected from
DC mode, brightness will be disabled.
 BRIGHTNESS: Select to adjust the brightness of the image.
Adjustable range: 0~100
6
BRIGHTNESS
RETURN 
Lens
I.........I.........I 100
SECO-LARM U.S.A., Inc.
On-Screen Display Manual