TP-Link Omada EAP620 HD User Manual page 70

The following table introduces how to configure these parameters:
From
To
SMTP Server
Enable
Authentication
Time Mode
Fixed Time
Period Time
■ Server
If Server is configured, system logs will be sent to the specified system log server, and
you can use the syslog software to view the logs on the server.
Enable this feature and enter the IP address and port of the system log server.
System Log Server IP
System Log Server Port
More Client Detail Log
2. Click Save.
Enter the sender's E-mail address.
Enter the receiver's E-mail address.
Enter the IP address of the sender's SMTP server.
Note: At present, the domain name of SMTP server is not supported in
this field.
If the sender's mailbox is configured with You can check the box to
enable mail server authentication. Enter the sender's username and
password.
Select Time Mode: Fixed Time or Period Time.
Fixed Time means that the system logs will be sent at the specific time
every day. Period Time means that the system logs will be sent at the
specific time interval.
If you select Fixed Time, specify a fixed time to send the system log
mails. For example, 08:30 indicates that the mail will be sent at 8:30 am
everyday.
If you select Period Time, specify a period time to regularly send the
system log mail. For example, 6 indicates that the mail will be sent every
six hours.
Enter the IP address of the server.
Enter the port of the server.
With the option enabled, the logs of clients will be sent to the
server.
66