Configure Mac Filtering - TP-Link Omada EAP620 HD User Manual

3. Specify the VLAN ID for the wireless network in the VLAN ID column. Every VLAN ID
represents a different VLAN. It supports maximum 8 VLANs per frequency band. The
VLAN ID range is 0 to 4094. 0 is used to disable VLAN tagging.
4. Click Save.

2.4 Configure MAC Filtering

MAC Filtering is used to allow or block the clients with specific MAC addresses to access
the network. With this feature you can effectively control clients' access to the wireless
network according to your needs.
To configure MAC Filtering, go to the Wireless > MAC Filtering page.
36