TP-Link Omada EAP620 HD User Manual page 53

2. In the Detected Rogue AP List section, click
3. Wait for a few seconds without any operation. After detection is finished, the detected
APs will be displayed in the list.
The following table introduces the displayed information of the APs:
MAC
SSID
Band
Channel
Security
Beacon Interval
Signal
4. To move the specific AP to the Trusted AP list, click
example, we move the first two APs in the above Detected Rogue AP list to the Trusted
AP list.
Displays the MAC address of the AP.
Displays the SSID of the AP.
Displays the frequency band the AP is working on.
Displays the channel the AP is using.
Displays whether the security mode is enabled on the AP.
Displays the Beacon Interval value of the EAP.
Beacon frames are sent periodically by the AP to announce to
the stations the presence of a wireless network. Beacon Interval
determines the time interval of the beacon frames sent by the AP
device.
Displays the signal strength of the AP.
49
.
in the Action column. For