Advertisement
G: Setting Multimate™ Mode
Step 1
Enter into the timer Setup Mode - See PART A
Step 2
Click the push button 8 times
Step 3
LED will blink 8 times
a.
If the MultiMate™ function is currently Disabled, lamp(s) connected to
the dimmer will now turn OFF
b. If the MultiMate™ function is currently Enabled, lamps(s) connected to
the dimmer will now turn ON
Note: To cancel/exit do nothing for 30 seconds
Step 4
To Enable MultiMate™ (Default) push-and-hold the button until the lamp(s) turns ON
To Disable MultiMate™ push-and-hold the button until the lamp(s) turns OFF
Note: To cancel/exit do nothing for 30 seconds
Step 5
Click once to save & exit
Push Button Minute Timer
9
Advertisement
