Advertisement
B: Setting the Timeout Interval
The Minutes timer allows a timeout duration of between 1 to 30 minutes in increments of 1 minute.
Out of the box (factory defaults), the time out interval is set to 15 minutes.
To change the time out interval from the default 15 minutes, follow the steps below.
Step 1
Enter into the timer Setup Mode - See PART A
Step 2
Click the push button 2 times
Step 3
The LED Indicator will blink 2 times
Note: To cancel/exit do nothing for 30 seconds
Step 4
To set the time out interval, push and hold the button and count the number
of blinks. Each blink of the indicator adds 1 minute to the minute timer
Step 5
When the number of blinks counted equals the number of minutes required,
release the button
The time out interval is saved and setup will exit automatically
Note
During normal use the indicator will blink when the timer is turned on to
indicate it is in time out mode
Trying to select a time interval of 0 will result in setting 1 minute timeout
The timeout period on Minute Timers connected in parallel need to be set
individually. The same timeout is not automatically set across units
Push Button Minute Timer
4
Advertisement
