Advertisement
Timer Setup
+
The LEDsmart
push button timer has a number of useful functions which can easily be set up by entering setup mode and
following the four easy steps.
The TIMEOUT PERIOD should always be set up. The other settings are optional, depending on the application. To set the
timeout period now, go to the next page.
Timer Setup Functions
Function
Setting the Timeout period
Setting Maximum Brightness
Setting Advanced Timer Features
Setting Off State LED Feature
Converting from minute to hour
timer
Setting MultiMate™ Mode
Factory Defaults Reset
A: Entering Setup Mode
If the timer has been powered up for LESS THAN 15 MINUTES see A1.
If the timer has been powered up for MORE THAN 15 MINUTES see A2.
Once in Setup Mode, options are selected by a series of 'clicks' of the push button. Each 'click' should be within 1 second
of the previous click.
See Part
A
B
C
D
E
F
G
Push Button Minute Timer
2
Advertisement
