No
Parts
Electronic Part Indoor
&Outdoor Connecting
Cable
4
Fan& Motor
Samsung Electronics
Procedure
1) Disconnect all Indoor and Outdoor Cables
connected to the Terminal Board.
1)
(Use +Screw Driver.)
1) Disassemble the Fan Motor Wire
Connector, Thermistor Wire Connector,
Drain Pump Wire Connector and Float
Switch Wire Connector.
2) Loosen 4 screws in the mark
1)
(Use +Screw Driver.)
3) Disassemble the Base Control from the
Main Body.
.
Remark
3-5