Sony TA-SA100WR Service Manual page 25

Pin No. Pin Name
77, 78 NO USE
79 S-AIR_RESET
80 NO USE
81 EEP_WP
82 EEP_SCL
83 EEP_SDA
84 DAMP_OUT2DLY_SW
DAMP_PWM_MODE_
85
SW
86, 87 NO USE
88 PAIRING_LED
89 NO USE
90 S-AIR_ID_SW
91 SUR_MODE_SW
92 RESERVE1
93 RESERVE2
94 KEY2
95 KEY1
96 AVss
97 KEY0
98 Vref
99 AVcc
100 NO USE
I/O
- Not used
O S-AIR reset signal output to the EZW-RT10
- Not used
O Write protect signal output to the EEPROM
I/O Serial clock signal input/output with the EEPROM
I/O Serial data input/output with the EEPROM
I Clock delay switch input terminal
I Setting terminal for the PWM mode output switch
- Not used
O LED drive signal output of the pairing indicator
- Not used
I S-AIR ID select signal input terminal
I Surround mode select signal input terminal
I Destination select signal input terminal
I Model select signal input terminal
I Key2 input terminal (for debug)
I Key1 input terminal (for debug)
- Ground terminal
I Key0 input terminal (for debug)
I Reference voltage (+3.3V) input terminal
- Power supply terminal (+3.3V)
- Not used
Description
"L": reset
"H": protect
Fixed at "H" in this set
Fixed at "H" in this set
"H": LED on
"L": surround, "H": surround back
Fixed at "L" in this set
Fixed at "L" in this set
TA-SA100WR
25