Adjusting The Feet; Electrical Connection - Beko RDNE480M21W User Manual

Installation

3.3. Adjusting the feet

If the product stands unbalanced
after installation, adjust the feet on
the front by rotating them to the right
or left.
3.4. Electrical
connection
A
WARNING:
connections via extension
cables or multi-plugs.
B
WARNING:
cable must be replaced by the
Authorized Service Agent.
If two coolers are to be
C
installed side by side, there
should be at least 4 cm
distance between them.
• Our company shall not be liable
for any damages that will arise
when the product is used
without grounding and electrical
connection in accordance with the
national regulations.
• Power cable plug must be within
easy reach after installation.
• Connect your refrigerator to a
grounded outlet rated for a voltage
value of 220-240V /50 Hz. Outlet
shall have 10 to 16A fuse.
• Do not extension cords or cordless
multiple outlets between your
product and the wall outlet.
Refrigerator / User Manual
Do not make
Damaged power
9 /38 EN
Hot Surface Warning!
Side walls of your product is
equipped with refrigerant
pipes to improve the cooling
C system. Refrigerant with high
temperatures may flow through
these areas, resulting in hot
surfaces on the side walls. This
is normal and does not need any
servicing. Please pay attention
while touching these areas.