Table of Contents
Advertisement
10.4 CLEANING THE HOSE
FILTER
Damages on the machine that may be
caused by impurities coming from the
urban supply water or your own water
installation (such as sand, dirt, rust, etc.)
can be prevented by means of the filter
attached to the water inlet hose. Check the
filter and the hose regularly and clean them
if necessary.
1.
Turn off the tap and remove the hose.
2. After taking out the filter, clean it
under running tap water.
3. Place the cleaned filter back to its seat
in the hose.
4. Install the hose to tap.
(MODEL DEPENDING)
10.5 CLEANING THE
IMPELLERS
Clean the impellers at least once a week in
order for the machine operates efficiently.
LOWER IMPELLER
Check if the holes on the lower impeller (1)
are clogged. If they are clogged, remove
and clean the impeller. Pull the lower
impeller up to remove it (A, B).
1
A
B
C
33
USA
Advertisement
Table of Contents
