Tele System PALCO22 LED09 Manual page 34

SCART: To enable SCART input
AV: to enable the AV input (RCA)
YPbPr: to activate the YPbPr input.
HDMI: to activate the HDMI input.
PC: to activate the PC mode
USB: to access content loaded on a USB memory. (See Chapter 16)
1.16 Main Menu description
Press the MENU key to bring up the main menu and use the arrow keys ▲ / ▼ and t /
u to navigate through the titles of menu. Press the MENU button to return to the
previous menu or EXIT to exit. The menus are: Channels, Images, Sound, Time,
Security, Settings.
1.17 First installation
When the TV is turned on for the first time or after a factory reset, a wizard will allow
the simple and optimal installation of the TV:
Select the installation language (OSD Language) with the t / u arrow keys (default
Italian). Go on to the next step by pressing the ▼ button.
Then select the installation country (Italy default) using the arrow keys t / u. Press OK
to move on to the next step.
Select the tuner signal type (DVB-T2 or Satellite) to start searching for channels and
press OK to start an auto scan.
At the end of the DVB-T2 scan, a list of LCN conflicts to be resolved manually will
appear. The user can choose the channel to be assigned to each disputed LCN position
manually or automatically all at once (recommended).
If you choose satellite, you can choose to load a default satellite channels list by
pressing OK and confirming Yes (left arrow) to the confirmation request; or proceed
with normal installations, once the satellite parameters are set, scan type, channel type
and type of service, by pressing OK and choosing No (right arrow) on the next screen.
1.18 Automatic channel search.
Press the MENU button; in CHANNEL menu, select the entry Automatic search and
confirm with the OK button.
Select the country of installation (default Italy).
Using the button position yourself on Start and press OK to start an automatic channel
search.
At any time you can: Press EXIT or Menu to terminate the search
10