Tele System PALCO22 LED09 Manual page 33

ENGLISH
1.9 Menu for PC mode
After switching to PC mode, you can adjust various settings by pressing the MENU
button on the front panel or the remote control: the usual menu will appear, which will
have some functions active only in this mode: to navigate through the menu use the ▲
/ ▼ keys . Change the values using the t / u buttons.
Basic Function
1.10 Power / Standby
While the TV is in operation, to turn it off, press the Power button on your remote
control. The LED on the front panel of the TV will change from green to red.
To switch the TV on again, press the Power button (on the remote control or on the
TV).
1.11 Program selection
To select a program, press the P+/P- buttons or use the numeric keys for direct channel
selection.
1.12 Volume regulation
Press the V- / V+ buttons on the standard remote control to increase / decrease the
volume.
1.13 Mute (temporary)
Pressing the MUTE button, the sound is interrupted and the video shows the symbol of
the function. To reactivate the sound, you can press the MUTE button again or one of
the volume buttons V- / V +.
1.14 Program recall
You can recall the previously selected program by pressing the BACK button and by
pressed it again, it returns to the program you were watching.
1.15 Source selection
By pressing the Source button, you can select the TV mode:
DTV: To activate the Digital TV mode and allow the reception of digital TV programs;
9