Ip Config Settings - Star Micronics AirPrint User Manual

2.2.4 IP Config Settings

If you need to change IP Address Static, please change them, then save the settings.
IP Parameters
The following table shows the Static (fixed address) and Dynamic (dynamic address acquisition)
items of the IP address that can be stored in the non-volatile memory.
Note: If setting Static to anything other than 0.0.0.0, set all Dynamic to DISABLE.
If setting Dynamic to ENABLE, set all Static to 0.0.0.0.
After change the settings, please click "submit" and save the settings.
© 2010-2021 Star Micronics Co., Ltd.
7 / 20