Advertisement
If the remote control is not working properly, please follow the
steps to pair the device again:
① Turn on the stabilizing stick first. Press the power button
enter the pairing mode, and the working mode indicator light flashes
alternately in yellow and green.
② Then turn on the remote control. Pairing is complete in about 1
second, and the working mode indicator light stays on green.
Single Press: Switch the landscape
6
and portrait modes
Double Press:
Recenter the stabilizing stick
Press Five Times:
(Please do calibration on a flat surface when the
stabilizing stick is not level or drifting. There will
be a beep sound after enabling the calibration,
and do not move the stabilizing stick until the
calibration is done and hear another beep sound.)
Auto calibration
EN 07
7 times
to
Advertisement
Need help?
Do you have a question about the iSteady and is the answer not in the manual?
Questions and answers