Vivo BEE-V003E Instruction Manual
Vivo BEE-V003E Instruction Manual

Vivo BEE-V003E Instruction Manual

Electric three frame stainless steel honey extractor
Hide thumbs Also See for BEE-V003E:

Advertisement

Quick Links

Electric Three Frame Stainless Steel Honey Extractor
Instruction Manual
SKU: BEE-V003E
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
https://vivo-us.com/products/bee-v003e
help@vivo-us.com
www.vivo-us.com
309-278-5303

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BEE-V003E and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Vivo BEE-V003E

  • Page 1 Electric Three Frame Stainless Steel Honey Extractor Instruction Manual SKU: BEE-V003E Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/bee-v003e help@vivo-us.com www.vivo-us.com 309-278-5303...
  • Page 2 WARNING: IMPORTANT SAFETY INFORMATION READ AND FOLLOW ALL SAFETY REQUIREMENTS KEEP THIS MANUAL IN A SAFE AND DRY PLACE FOR FUTURE REFERENCE If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts.
  • Page 3 PACKAGE CONTENTS 1 (x1) Honey Extractor 2 (x1) Honey Gate with Lid 3 (x1) Hex Nut (on Honey Gate) 4 (x1) O Ring (Pre-installed on Honey Gate) 5 (x3) 6 (x12) Leg Bolt 7 (x12) Washer 8 (x2) Lid (with a Safety Switch) 9 (x12) M4 Bolt 10 (x12)
  • Page 4 STEP 2 To install honey gate, remove large hex nut from gate piece. Insert gate through the front side hole and secure backside with hex nut (tighten enough to seal O ring). STEP 3 Close both lids to engage safety switches.
  • Page 5 STEP 4 Extractor is ready to operate. (see Operating Instructions) STEP 5 If needed, adjust coupling using the attached bolts. STEP 6 (Optional) Bolt feet down to floor or surface for added stability (hardware included).
  • Page 6 OPERATING INSTRUCTIONS STEP 1 With the control dial set to “0” and power switch set to off (O), plug the power cord into a standard AC wall outlet. STEP 2 Place honey frames in extractor basket. Load three sides to keep extractor balanced as this will reduce any possible shaking.
  • Page 7 CARE & MAINTENANCE QUICK CLEANING Option 1: Rinse extractor out with cold water from a hose. If available, a pressure washer is very effective. Empty excess water to prevent possible surface rust. Option 2: Place open extractor next to hive. Bees will clean it out and use the materials.
  • Page 8 - 83% within < 2hr - 92% within < 3hr www.vivo-us.com : < 15 M AVG. RESOLUTION TIME (within office hrs) : 5M 4S 309-278-5303 AVG. RESOLUTION TIME (within office hrs) FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com...

Table of Contents