Vivo BEE-V004E Instruction Manual

Vivo BEE-V004E Instruction Manual

Electric 4 to 8 frame stainless steel honey extractor
Hide thumbs Also See for BEE-V004E:

Advertisement

Quick Links

Electric 4 to 8 Frame Stainless Steel Honey Extractor
Instruction Manual
SKU: BEE-V004E
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
https://vivo-us.com/products/bee-v004e
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
help@vivo-us.com
www.vivo-us.com
Chat live with an agent!
309-278-5303

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BEE-V004E and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Vivo BEE-V004E

  • Page 1 Electric 4 to 8 Frame Stainless Steel Honey Extractor Instruction Manual SKU: BEE-V004E Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/bee-v004e GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST help@vivo-us.com...
  • Page 2: Package Contents

    WARNING: IMPORTANT SAFETY INFORMATION READ AND FOLLOW ALL SAFETY REQUIREMENTS KEEP THIS MANUAL IN A SAFE AND DRY PLACE FOR FUTURE REFERENCE If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts.
  • Page 3: Assembly Steps

    ASSEMBLY STEPS STEP 1 Remove cap nuts and washers from the lower leg supports on Drum (A). Washer Cap Nut STEP 2 Mount Legs (B) to Drum (A) using the previously removed hardware in the lower holes, and M8 Plastic Knobs (S-A) with M8 Washers (S-B) in the upper holes. Washer Cap Nut...
  • Page 4 STEP 3 Install Honey Gate (D) in Drum (A). Inside Drum STEP 4 Line up holes in Lids (C) with the hinges in the crossbar of Drum (A) and secure using M4x12 Screws (S-C) and M4 Nuts (S-D). NOTE: Lids (C) must be installed properly and in the down position to engage the safety switches and allow the motor to turn on.
  • Page 5 STEP 5 Plug Power Cable (E) into the motor on Drum (A). STEP 6 (Optional) For added security, Concrete Anchors (S-E) can be use to secure the extractor to the floor.
  • Page 6 OPERATING INSTRUCTIONS With the control dial set to “0” and power switch set to off (O), STEP 1 plug the power cord into a standard AC wall outlet. Place honey frames in extractor basket. Load three sides to keep STEP 2 extractor balanced as this will reduce any possible shaking.
  • Page 7: Care And Maintenance

    CARE & MAINTENANCE QUICK CLEANING Option 1: Rinse extractor out with cold water from a hose. If available, a pressure washer is very effective. Empty excess water to prevent possible surface rust. Option 2: Place open extractor next to hive. Bees will clean it out and use the materials.
  • Page 8 AVG. RESPONSE TIME (within office hrs) - 23% within < 15m - 38% within < 30m - 61% within < 1hr - 83% within < 2hr - 92% within < 3hr FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com...

Table of Contents