Weslo compact SL User Manual page 24

Hide thumbs Also See for compact SL:

Table of Contents

PROBLEM: The walking belt is off-center or slips when walked on

SOLUTION: a. If the walking belt is off-center, first remove the key

and UNPLUG THE POWER CORD. If the walking

belt has shifted to the left, use the hex key to turn

the left idler roller bolt clockwise 1/2 of a turn; if the

walking belt has shifted to the right, turn the left

bolt counterclockwise 1/2 of a turn. Be careful not to

overtighten the walking belt. Then, plug in the

power cord, insert the key, and run the treadmill for

a few minutes. Repeat until the walking belt is cen-

tered.

b. If the walking belt slips when walked on, first re-

move the key and UNPLUG THE POWER CORD.

Using the hex key, turn both idler roller bolts clock-

wise, 1/4 of a turn. When the walking belt is cor-

rectly tightened, you should be able to lift each

edge of the walking belt 2 to 3 in. (5 to 7 cm) off the

walking platform. Be careful to keep the walking

belt centered. Then, plug in the power cord, insert

the key, and carefully walk on the treadmill for a few

minutes. Repeat until the walking belt is properly

tightened.

All manuals and user guides at all-guides.com

Table of Contents

Wetl30708.0