Summary of Contents for Weslo Cadence 600 Treadmill
Page 1
Model No. WETL25905.1 USER'S MANUAL Serial No. Write the serial number in the space above for future reference. Serial Number Decal QUESTIONS? As a manufacturer, we are com- mitted to providing complete customer satisfaction. If you have questions, or if there are missing or damaged parts, please call: 08457 089 009...
ORDERING REPLACEMENT PARTS ..........Back Cover Note: A PART IDENTIFICATION CHART, an EXPLODED DRAWING, and a PART LIST are attached in the center of this manual. WESLO is a registered trademark of ICON IP, Inc.
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read the following important precautions and information before operating the treadmill. 1. It is the responsibility of the owner to ensure 12. Keep the power cord away from heated sur- that all users of this treadmill are adequately faces.
Page 4
DANGER: other than the procedures in this manual Always unplug the power should be performed by an authorized ser- cord immediately after use, before cleaning vice representative only. the treadmill, and before performing the maintenance and adjustment procedures 24. This treadmill is intended for in-home use described in this manual.
® CADENCE ing this manual, please see the front cover of this 600 treadmill. The CADENCE 600 treadmill is manual. To help us assist you, please note the product designed to help you reach your exercise goals in the model number and serial number before contacting convenience and privacy of your home.
ASSEMBLY Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials; do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton.
Page 7
3. Hold a Frame Spacer (27) against the right side of the Frame (79) as shown. Insert a 4” Bolt (70) into the indi- cated hole in the Frame Spacer and the Frame. Next, tighten a 3/4” Tek Screw (3) into the Frame Spacer and the Frame.
Page 8
6. With the help of a second person, lift and hold the Frame (79) between the Right Handrail (59) and the Left Handrail (not shown). Finger tighten a 4” Bolt (70) with a 3/8” Washer (66) and a 3/8” Star Washer (29) through the Right Handrail and the Frame Spacer (27) into the Frame.
Page 9
9. Insert the excess Wire Harness (60) into the large hole in the side of the Right Handrail (59). Securely tighten Opening Ties the plastic ties on the bottom of the Console Base (52) to prevent the Wire Harness from slipping. Then, cut off the ends of the plastic ties.
OPERATION AND ADJUSTMENT THE PRE-LUBRICATED WALKING BELT Your treadmill features a walking belt coated with high-performance lubricant. IMPORTANT: Never apply sili- cone spray or other substances to the walking belt or the walking platform. Such substances will deteri- orate the walking belt and cause excessive wear. HOW TO PLUG IN THE POWER CORD This product must be earthed.
Page 11
CONSOLE DIAGRAM Clip FEATURES OF THE CONSOLE HOW TO TURN ON THE POWER The treadmill console offers a selection of features Plug in the power cord (see page 10). designed to make your workouts more effective. When the manual mode of the console is selected, the Locate the on/off switch on speed and incline of the treadmill can be changed with the treadmill frame near the...
Page 12
The Digital Speed zone Insert the key into the console. of the display will show the speed of the walk- See HOW TO TURN ON THE POWER on page ing belt. Select the manual mode. The Distance zone of the display will show the When the key is insert- distance you have ed, the manual mode...
Page 13
The Time/Pace zone of time your heart beats, one or two dashes will the display will show appear, and then your heart rate will be shown. the total number of For the most accurate heart rate reading, continue hours that the treadmill to hold the contacts for about 15 seconds.
Page 14
Press the Start button or the Speed increase When the program ends, remove the key from button to start the program. the console. A moment after the button is pressed, the tread- When the program ends, see step 7 on page 13. mill will automatically adjust to the first speed set- ting for the program.
HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, unplug the power cord. CAUTION: You must be able to safely lift 20 kg (45 lbs.) to raise, lower or move the treadmill. 1.
Page 16
HOW TO LOWER THE TREADMILL FOR USE 1. Hold the upper end of the treadmill with your right hand as shown. Using your left hand, pull the lock knob to the left and hold it. Pivot the frame down until it is past the lock pin.
TROUBLESHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please see the front cover of this manual. PROBLEM: The power does not turn on SOLUTION: a.
Page 18
PROBLEM: The walking belt slows when walked on SOLUTION: a. If an extension cord is needed, use only a 3-conductor, 1mm (14-gauge) cord that is no longer than 1.5 m (5 ft.). b. If the walking belt is overtightened, treadmill perfor- 5 to 7 cm mance may decrease and the walking belt may become damaged.
CONDITIONING GUIDELINES begin to use stored fat calories for energy. If your goal WARNING: is to burn fat, adjust the speed and incline of the Before beginning treadmill until your heart rate is near the lowest num- this or any exercise program, consult your ber in your training zone.
To help us assist you, please be prepared to give the following information: • the MODEL NUMBER of the product (WETL25905.1) • the NAME of the product (WESLO CADENCE 600 treadmill) • the SERIAL NUMBER of the product (see the front cover of this manual) •...
Page 21
Handrail Bolt (20)–4 Frame Bolt (32)–2 PART IDENTIFICATION CHART Remove this chart and use it to identify small parts during assembly. Save this chart and the EXPLODED DRAWING/PART LIST for future reference. Silver Ground 1/2” Silver Screw 3/4” Screw (2)–8 1”...
Page 22
PART LIST—Model No. WETL25905.1 R1005A Key No. Qty. Description Key No. Qty. Description Motor Hood Motor Pivot Nut 3/4” Screw Handrail Foam 3/4” Tek Screw Belly Pan Grommet 8” Cable Tie Right Handrail 1” Tek Screw Wire Harness Warning Decal, Console 5/16”...
Need help?
Do you have a question about the Cadence 600 Treadmill and is the answer not in the manual?
Questions and answers