Canon MLT (F) User Manual page 21

2
Select MLT (F) FREQUENCY
If MLT (F) FREQUENCY is not currently selected (in this case, the DWT ENHANCE.,
DWT DEP, and DWT NOISE R. tabs are not displayed), touch the Frequency Pro-
cessing Mode button to open the window, then touch [MLT (F) FREQUECY].
When the Frequency Processing Mode button is not visible
If the Frequency Processing Mode button is not displayed on the screen, touch the
button at the bottom part of the screen (CXDI System Software Version 5.1 or later
only).
3
Select the tab
Touch the desired tab from among three tabs: DWT ENHANCE., DWT DEP, DWT
NOISE R.
4
Change the parameters
Set the parameters provided with the selected tab, referring to the corresponding descrip-
tions; 3.2 Changing DWT ENHANCE. Tab (
( P.22), 3.4 Changing DWT Noise R. Tab (
Frequency Processing Mode Window
– 15 –
3.QA Mode Settings
Frequency
Processing
Mode
BUTTON
P.17), 3.3 Changing DWT DEP Tab
P.26).
Continued on the following page >>