Setting Dwt Enhance. Tab - Canon MLT (F) User Manual

2.2 Setting DWT ENHANCE. Tab

1
2
NOTE:
Set the DWT Edge Enhancement effective
Touch [EDGE ENHANCE.] to display the parameters. The appearance of the button
switches over between the highlight (in white outline characters against a colored back-
ground) and normal display each time you touch the button. The parameters are available
when the button is highlighted.
FREQUENCY
BASE Button
DENSITY
BASE Button
DWT ENHANCE. Screen with Parameters
Set the EFFECT parameter
Touch the or button, and set the value within the range between 1 to 20.
The value on the left is the setting saved previously, and the value on the right is the cur-
rent setting.
The value indicates the degree of edge enhancement.
Select a larger value for higher degree of enhancement, and select a smaller value for
lower degree of enhancement.
If the EFFECT parameter is set to an excessive value, artifacts may occur in
the image, or the effective data of the exposure image may be damaged.
Check the output of exposure image, and if the results of enhancement
appear to be too strong, either set the parameter to a smaller value, or set the
DWT Edge Enhancement not effective.
– 7 –
2.Edit Exposure Mode Settings
Continued on the following page >>