Advertisement
Frequently check the tyre inflation pressure because all tyres lose air slowly over time. For extended storage,keep the
weigh of the biycle off the tyres.
WARNING: Do not ride or sit on the bicycle if either inner tube is under inflated. This can damage the
tyre and inner tube. Do not use unregulated air hoses to inflate the inner tubes. An unregulated hose can suddenly
over inflate bicycletyres and cause them to burst.
Use a hand or a foot pump to inflate the inner tubes. Service station meter-regulated air hoses are also acceptable.
The correct inflation pressure is shown on the tyre sidewall.
Before adding air to any tyre, make sure the edges of the tyre (the bead) is the same distance from the rim, all
around the rim, on both sides of the tyre. If the tyre does not appear to be seated correctly, release air from the
inner tube until you can push the bead of the tyre into the rim where necessary, add air slowly and stop frequently
to check the tyre sealing and the pressure, until you reach the correct inflation pressure as indicated on the tyre
sidewall.Replace worn or defective tyres and inner tubes.
23
Advertisement
