Before you start: wiring precautions
If you plan to install two-way light switches, read the following precautions:
To control a light with two or more switches, only use the products:
x 1
Connected switch
Do not use: two connected switches to control the same lighting point.
Tip if replacing a two-way switch:
old flush-mounted switch replaced
by the wireless control.
Use a connector
to connect live wire
and traveller wires
1 and 2.
AND
x 1
or several
Wireless controls for all control points
(not included in this pack)
AND
/
OR
Live
Traveller 1
Traveller 2
2
x 1
or several