Mitsubishi Electric HC3100U User Manual page 8

Preparing your projector (continued)
Bottom side
Remote control
1 ON
2
HDMI
3
COMPUTER
PC
4
1
5
6
MENU
7
CONTRAST
CNT
8
GAMMA
AUTO POSITION
9
AP
10
Using the picture quality adjusting buttons
When you press any of the picture quality adjusting buttons, the screen for adjusting the picture quality appears. Ad-
just the picture quality by pressing the  and  buttons. The picture quality adjustment can be made alternatively in
the IMAGE menu. (See page 24.) Items in the menus are shown in parentheses below.
CONTRAST (CONTRAST) ............ Adjusts the contrast of the projected image.
BRIGHTNESS (BRIGHTNESS) ...... Adjusts the brightness of the projected image.
COLOR TEMP (COLOR TEMP.) ...... Selects one of the preset color temperatures. Color adjustment of USER mode is
GAMMA (GAMMA MODE) ............ Selects one of the preset gamma mode. Adjustment of USER mode is also
SHARPNESS (SHARPNESS) ......... Adjusts the sharpness of the projected image.
BrilliantColor™ (BrilliantColor™) ... Adjusts the BrilliantColor™ of the projected image.
EN-8
1
2
3
21
POWER OFF 20
COMPONENT
19
COMP VIDEO
18
S-VIDEO
AV MEMORY
2 3
17
ENTER
16
15
ASPECT
14
BRIGHTNESS COLOR TEMP
BRT CT
13
BrilliantColor
SHARPNESS TM
SHARP BC
12
KEYSTONE
IRIS KS
11
also available. (Refer to page 29.)
available. (Refer to page 29.)
1 Adjustment foot (Front)
2 Lamp cover
3 Adjustment feet (Rear)
Caution:
Do not replace the lamp immediately after using the
projector because the lamp would be extremely hot
and it may cause burns.
1 ON ( I ) button
2 HDMI button
3 COMPUTER button
4 AV MEMORY buttons
5 ENTER button
6 MENU button
7 CONTRAST button*
8 GAMMA button*
9 AUTO POSITION button
10 SHARPNESS button*
11 IRIS button
12 KEYSTONE button
13 BrilliantColor button*
TM
14 COLOR TEMP button*
15 ASPECT button
16 BRIGHTNESS button*
17 Direction buttons
18 S-VIDEO button
19 VIDEO button
20 OFF ( ) button
21 COMPONENT button
* : See below for the picture quality adjusting buttons.
Important:
• When you press any button on the remote control, the
buttons on the remote control are lit. Wait approx. 5
seconds after releasing the button to turn them off.
• The direction buttons are used for the keystone adjustment
and fine adjustment (  and  buttons only).