Related Manuals for Wilo Z 15+
Summary of Contents for Wilo Z 15+
- Page 1 Wilo Z 15+ Timed and Constant Temperature Circulating Pump Installation and Operating Instructions...
- Page 2 Please read over the operating manual prior to installation and keep it for reference. The main electrical connection to the pump must be grounded before use. It is strictly prohibited to touch the electrical connections of the pump while the pump ...
-
Page 3: Table Of Contents
Contents I. MODEL DESCRIPTION ............................... 1 II. TECHNICAL PARAMETERS ............................2 III. INSTALLATION PRECAUTIONS ..........................2 IV. HOW TO USE (applies to models with timer only; models without timer, skip to SECTION V. FAULT ANALYSIS AND ELIMINATION) ..............................4 V. FAULT ANALYSIS AND ELIMINATION ........................6... -
Page 4: Model Description
Z 15+ - Timer Type Circulation Pump Version 21.07 Thank you for choosing the WILO® Z 15+ domestic hot water recirculator pump. Please read over the operating manual prior to installation and keep it for reference. Warning The pump must before use. -
Page 5: Technical Parameters
Step 1: Carefully check system components to ensure that the components are not missing or damaged. The circulating system should include: One circulating pump with, or without, timing function (provided by WILO) Installation and operation instructions (provided by WILO) Jet valve (provided by WILO as an optional accessory) ... - Page 6 Z 15+ - Timer Type Circulation Pump Version 21.07 Step 2: Turn off the power to the water heater and isolate the cold-water supply to water heater; open the hot water tap in the house and wait until the residual water is drained out. Step 3: Install the water pump at the hot water outlet of water heater;...
-
Page 7: How To Use (Applies To Models With Timer Only; Models Without Timer, Skip To Section V. Fault Analysis And Elimination)
Z 15+ - Timer Type Circulation Pump Version 21.07 Performance parameters of the product Function overview Function name Function description Forced operation The water pump runs continuously. Timed operation The water pump automatically runs in the set period of time. (The minimum (applies to models setting period of time is 1 hour in the timing function) with timer only) - Page 8 Z 15+ - Timer Type Circulation Pump Version 21.07 ① Time calibration: Adjust the time of water pump to the current time; press the “Time calibration” 2. Debugging and menu setting: key, the hour area starts flashing, press the “+/-” key to adjust the hours; press the “Run” key to enter, the minute area will then flash, press the “+/-”...
-
Page 9: Fault Analysis And Elimination
Note: All the figures given in this manual are schematic diagrams; as the performance of the product is improving continuously, the purchased products (including appearance and color, etc.) are subject to physical goods. END OF SECTION WILO USA LLC Wilo Canada Inc. Wilo Mexico...
Need help?
Do you have a question about the Z 15+ and is the answer not in the manual?
Questions and answers