Before Using For The First Time - Daniela DAN90AFS User Manual

BEFORE USING FOR THE FIRST TIME

SETTING AND CHANGING THE CURRENT TIME
The oven only operates when the time has been set.
When the appliance is connected to the electrical supply or when there has been a power cut,
the symbol for Time flashes automatically.
• To change a time that has already been set, press the Clock function
repeatedly until the symbol for Time
• Using the
stops and the clock displays the time of day set.
The appliance is now ready for use.
GETTING TO KNOW THE APPLIANCE
The appliance can be operated in test mode for testing or performing all operating steps.
The oven will not heat up during the test.
SWITCHING ON THE TEST MODE
1. Switch off the appliance using the On/Off
2. Press and hold
and "d" lights up in the display.
SWITCHING OFF THE TEST MODE
1. Switch off the appliance using the On/Off
2. Press and hold
and "d" goes up in the display.
OPERATING OF OVEN
• The oven light is switched on as long as an oven function is started.
• The oven light is switches off when the appliance switched off automatically.
The oven light is switched on or gone off by pressing the
approx. 2 seconds when the appliance is switched off.
• Switch appliance off using the On/Off
PA G E 1 4
P
or button, set the current time. After about 5 seconds, the flashing
and buttons at the same time until an acoustic signal is heard
and buttons at the same time until an acoustic signal is heard
I 02 9604 1226 E I sales@danielaappliances.com.au
flashes.
button.
button.
and
button.
button
buttons in turn, within
W | danielaappliances.com.au