Self-Cleaning Function; Cleaning And Maintenance; Troubleshooting - Imetec P9901 Operating Instructions Manual

• Press the Speed button repeatedly until the Self-Cleaning symbol is displayed.
• Press On/off to operate the appliance.
• Pour a maximum amount of 300 ml of water into the hopper.
EN
• The self-cleaning function will last about 30 seconds after which the appliance will stop automatically.
• Remove the plug from the power socket.
• Clean any parts that come into contact with foodstuffs immediately as described in the chapter
'Cleaning and care'.
WARNING! Risk of damage to the appliance. Detachable
parts shall not be washed in a dishwasher.
• Turn the juicing bowl lid anticlockwise.
• Remove the juicing bowl from the motor unit by turning anticlockwise.
• Remove the filter and the reamer.
• Wash the removable parts - the plunger, funnel top, lid, reamer, juicing bowl, anti-drip spout cap, juice
filter, sorbet accessory, juice beaker and pulp container - by hand.
• Rinse the juicing bowl under running water, opening the silicone rubber plug [Fig. G].
• Clean the interior and exterior of the juice filter with the cleaning brush provided [Fig. H].
• Never immerse the washable parts in water hotter than 60°C.
• Wipe the motor unit with a dampened and thoroughly squeezed out sponge.
• Dry with a dry cloth.
Should one of the problems indicated occur, adopt the proposed solution:
The food spins around in the filter but no juice
is extracted.
Excessive pulp building up in the juice filter.
Appliance does not work.
Juice comes out from the bottom of the juicing
container.
The lid does not close.
The appliance stops during extraction.
The plastic parts stain with vegetables, such
as carrots.
20

SELF-CLEANING FUNCTION

CLEANING AND MAINTENANCE

TROUBLESHOOTING

Problems Solutions
Press Rev to reverse the direction of rotation and
clear the reamer of food.
Remove the filter and reamer and clean to remove the
pulp between individual batches of juice. Resume the
Alternate between inserting fibrous vegetables and
softer food.
Close the lid properly.
Close the silicone rubber plug at the back of the
juicing bowl completely [Fig B].
Check properly assembly of all the parts: juicing bowl,
filter and reamer.
Press Rev to reverse the direction of rotation and
clear the reamer of food, then resume extraction.
Operate the juice extractor at speed setting 3.
Clean the plastic parts with a cloth dipped in
vegetable oil.
process.