Graymills BTV Series Operation And Maintenance Instructions

SAFETY WARNINGS
You will find various types of safety information on the
following pages and on the labels attached to Graymills
equipment. The following Safety Statements explain their
meaning:
This is the safety alert symbol. It is used to alert you
to potential personal injury hazards. Obey all safety
messages that follow this symbol to avoid possible
injury or death.
DANGER indicates a hazardous situation
which, if not avoided, will result in death or
serious injury.
WARNING indicates a hazardous
situation which, if not avoided, could result
in death or serious injury.
CAUTION, used with the safety alert
symbol, indicates a hazardous situation
which, if not avoided, could result in minor
or moderate injury.
CAUTION, used without the safety alert
symbol, is used to address practices not
related to personal injury.
Never work with equipment you feel may be unsafe. Contact
your Supervisor immediately if you feel a piece of equipment is
in an unsafe condition.
Maintenance Instructions
BTV Series
Digital Tabletop
Ultrasonic Cleaner
INTRODUCTION
Ultrasonic cleaning is based on a cavitation effect caused by
high frequency ultrasonic wave vibrations in fluid. Microscopic
bubbles are formed and implode (cavitation) which provides
an intense scrubbing action on the surface of the item being
cleaned. Additionally, the bubbles are small enough to
penetrate even microscopic crevices, cleaning them thoroughly
and consistently.
Although this digital series of ultrasonic cleaners is very easy to
use, to get the best performance from your new purchase we
recommend you read this manual before beginning cleaning. It
contains important safety information as well as practical hints
for usage.
GENERAL GUIDELINES
• Only use the AC power cord supplied with the product.
Replace if it becomes damaged in any way.
• Do not operate the unit next to heat sources.
• Do not allow objects or liquids to enter the unit anywhere
except the tank.
• If the unit gets damaged, has been dropped, or appears to
have developed a fault, refer to the warranty information for
details.
795-92558 10-11
Operation and