Technical Specifications - KAP Medical K-1 Series Operating Instructions Manual

Electrical Specifications:
Note: The control unit Power Inlet is used as the means of isolating the equipment from the supply mains on all poles
simultaneously.
Input Voltage AC:
Input Frequency:
Maximum Power Consumption: 40 W ± 15 W
Circuit Protection:
Fuse Type:
Breaking Capacity: (BRK.CAP.) @125 VAC is 10kA
Mode of Operation:
Performance Specifications:
Weight Capacity:
Mattress Overlay:
Standard Replacement Mattress:
Bariatric Replacement Mattress:
Raised Side Bolstered Mattress:
Bariatric Raised Side Bolstered Mattress:
Foam Aire Mattress:
Pressure Zones:
AP Zones:
Max Flow:
Support Surface Inflation Time: 5~15 Minutes
Patient Comfort Pressures / Alternating Pressure
Soft Pressure:
Firm Pressure:
A/P Time:
A/P Low Pressure:
Patient Comfort Pressures / Alternating Pressure
Soft Pressure:
Firm Pressure:
A/P Time:
A/P Low Pressure:
Patient Contact
Control unit and the mattress are
Dartex top sheet is Halogen-free (bromide-free).
Mechanical Specifications: Control Unit (A)
Dimensions, LxWxH:
Weight:
Power Cord:
Connection:
Packaging:
Air Filter

TECHNICAL SPECIFICATIONS

U.S. / INTL.
90 ~ 240 VAC
60 / 50 Hz
Dual fused, 250V, 1A Slow blow fuse(s), std. fuses.
Bussmann GMD-1-R
@250 VAC is 35A
Continuous
360 lbs. (163 Kg.) maximum.
360 lbs. (163 Kg.) maximum.
1000 lbs. (455 Kg.) maximum.
360 lbs. (163 Kg.) maximum.
1000 lbs. (455 Kg.) maximum.
360 lbs. (163 Kg.) maximum.
2
2
42~52 LPM
(K-1, K-2)
6 ± 5 mmHg
32 ± 5 mmHg (K-1) & 31 ± 5 mmHg (K-2) of high AP pressure setting
1 Minute - 99 Minutes
0% - 80% (K-1 Elite) & 0% - 75% (K-2 Elite)
(K-1oem, K-2oem)
7 ± 5 mmHg
32 ± 5 mmHg
5, 10, 15 and 20 minute A/P Time(s)
0%, 25% 50% or 75% (K-1oem) & 0% or 50% (K-2oem) of high AP pressure setting
lead free, mercury free, and latex free
12" x 6 3/4" x 10.5" (30cm x 17cm x 27cm) (K-1, K-2 Elite models)
13.5" x 6" x 11" (34cm x 15cm x 28cm) (K-1oem, K-2oem models)
K-1, K-1oem = 10.5 lbs. (4.8 Kg.), K-2 = 12 lbs. (5.5 Kg.) & K-2oem = 11 lbs. (5 Kg.)
14' long Hospital Grade
(2) ¼" flow quick disconnect connector (K-1, K-1oem models)
(3) ¼" flow quick disconnect connector (K-2, K-2oem model)
1 piece per box
Internal (not serviceable)
K-1 & K-2 Series Owner's Manual
.
Page 5