Table of Contents
Advertisement
Nokia RoofTop™ Wireless Routing Installation Guide
1.
Connect the antenna and RF cable. Only connect cables at this step,
attaching other mounting hardware will make applying the
weatherproofing tape more difficult. See the NOTE for an exception.
When using a flat rectangular antenna mounting bracket you must
NOTE:
attach the antenna to the mounting bracket before weatherproofing, or
you will be unable to attach the antenna to the mount, because the
weatherproofing will prevent the antenna from passing through the
antenna mounting hole.
Mounting Bracket
2.
Cut an 8-inch section of the weatherproofing tape and remove the
black plastic film from the back of the tape.
3.
Stretch and apply the tape to the connection, wrapping the tape in the
direction of the connector threading. Pull the tape tight while
wrapping.
Outdoor Installation Procedures
17
Advertisement
Table of Contents
