Converting Analog Signals Into Digital Signals (Analog-Digital Converter); Connecting The Devices - Canon ZR400 Instruction Manual

Converting Analog Signals into Digital
Signals (Analog-Digital Converter)
By connecting the camcorder to a VCR or 8mm video camcorder, you can convert analog
video/audio signals to digital signals and output the digital signals via the DV terminal.
The DV terminal serves as output terminal only.

Connecting the Devices

Turn off all devices before starting the connections. Unload the tape from the camcorder.
Refer also to the instruction manual of the connected device.
Turning On the Analog-Digital Converter
CAMERA
MENU
VCR SETUP
( 37)
Open the menu and select [VCR SETUP]. Select [AV
and close the menu.
Signal flow
STV-250N Stereo Video
Cable (supplied)
Signal flow
Commercially available DV cable
PLAY (VCR)
VIDEO
L
AUDIO
R
CARD CAMERA
AV DV••••••••OFF
DV], set it to [ON]
E
CARD PLAY
81