Troubleshooting - IKEA GORLIG Manual

ENGLISH
7
2
1
First lift carefully and
then remove the
glass panel.
Pull the door trim to the front to remove it
Clean the glass panel with water and soap.
Dry the glass panel carefully.
When the cleaning is completed, install the
glass panel and the oven door. Do the above
steps in the opposite sequence.
Make sure that you install the internal glass
panel in the seats correctly and in the correct
sequence. The inner glass panel has a
symbol printed in the corner on one side.
The symbol must face the outside of the
door and the external glass panel.

Troubleshooting

Warning! Refer to Safety
chapters.
Replacing the lamp
Put a cloth on the bottom of the interior of
the oven. It prevents damage to the lamp
glass cover and the cavity.
Warning! Danger of
electrocution! Disconnect the fuse
before you replace the lamp.
The lamp and the lamp glass
cover can be hot.
1. Turn off the oven.
2. Remove the fuses from the fuse box or
turn off the circuit breaker.
3. Turn the lamp glass cover
counterclockwise to remove it.
4. Clean the glass cover.
5. Replace the oven light bulb with a 25 W,
230 V (50 Hz), 300 °C heat resistant oven
light bulb (connection type: E14).
6. Install the glass cover.
18