First Use - Advantech ICR-1601 Start Manual

Hide thumbs Also See for ICR-1601:

First Use

Before applying power to the router, connect the components that you required for your

applications. You cannot operate the router without connected antenna, inserted SIM card,

nor connected power supply.

If you do not have connected main antenna during operation of the router, the router can

be damaged!

1. Antenna

Use a SMA connector to connect the antennas to the router. The main antenna is con-

nected to the router by screwing on the ANT connector (see Figure below). The second diver-

sity antenna can also be connected to the DIV connector to improve performance.

2. SIM Card

The SIM card reader, for 3 V and 1.8 V SIM cards, is located on the front panel of the

router. If you intend to use this device to communicate over a cellular network, please place

an activated data-provisioned SIM card with an unblocked PIN into the SIM card reader. Push

your SIM card into the SIM1 or SIM2 slot until it clicks in place.

QSG-0005-EN, October 9, 2018

LUCOM GmbH — Flößaustr. 22a — 90763 Fürth — Tel.: +49 911/ 957 606 00 — E-Mail: info@lucom.de — www.lucom.de

Released in the Czech Republic

Start Guide

Table of Contents