Advertisement
4.
The following table describes the LEDs' function of the product.
LEDs for VDSL
2.2 Rear Panel
The DC Jack on the rear panel can be connected to power supply adaptor with the DC input.
Symmetric: Support the band plan G.997 and provide the symmetric
transmission on both downstream and upstream.
Asymmetric: Provides highest line rate in short range in asymmetric mode.
Pin 4: General protection
9dB: Better channel noise protection with SNR up to 9 dB
6dB: Original channel noise protection with 6 dB SNR.
blinking
Slow:
Idle
Fast:
Training
⚫ On
Device Power ON
CPE-mode
Linked
Off
Device Power OFF
CO-mode
Off line
Page 7
Advertisement
