Advertisement
Chapter 2 Hardware Installation
This chapter shows the front panel and how to install the hardware.
2.1 Front Panel
Front panel can be separated into five parts from left to right:
(1) DIP switch
(2) RJ-45 connector for Ethernet
(3) LEDs for Ethernet
(4) LEDs for VDSL
(5) RJ-45 connector for VDSL
1.
The RJ-45 is designed to connect to the Local Network with the Unshielded Twisted Pair (UTP)
cable. The LEDs on top of RJ-45 connector show the status below:
2.
LEDs for LAN
blinking
Activity
⚫ On
Link UP
100Mbps
Full Duplex
Off
Link UP
10Mbps
Half Duplex
Page 5
Advertisement
