Mindeo MP725 Quick Manual

MP725 Presentation Imager Quick Guide
Note
 A standard packing includes an imager, a USB cable and a CD (or a user manual).
 Accessories include a RS232 cable, a 5V adaptor.
 Use a piece of dry and soft cloth when cleaning the imager is in need.
Parts of the imager
Scan window
Beeper
Installing the cable
1. Switch off the host;
2. Refer to the below pictures, connect the host with the imager based on different cables;
3. Ensure that all connections are secure.
4. Switch on the host system. If the installation is successful, the beeper will beep and LED
will light.
RS232 cable
Trigger
USB cable
Note: 1. More details refer to User Manual. 2. For better readability, please print this document with laser printer. 3. Version: MP725_QG_EN_V1.3.
Return default parameters and version information
Default value initialization
Note: If the host cannot receive data normally because the input speed of the imager is too
fast, please scan the barcode below:
Programming instruction and example
Two programming modes have been provided as bellows:
Single-scan setting

Scan the appropriate
Single-scan setting
Multiple-scan setting

Scan "Option bar code"
Scan "The 1st character of option"
Scan "The 2nd character of option"
Scan "END"
Firmware version list
Example: to set Flow control to be XON/XOFF.
Example: to set Flow control to be XON/XOFF.