Mindeo MP80 Series User Manual

Mindeo MP80 Series User Manual

Image platform
Hide thumbs Also See for MP80 Series:

Advertisement

Quick Links

MP80xx Image Platform
User Manual
Version: MP80xx_UM_EN_V1.1.4

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MP80 Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Mindeo MP80 Series

  • Page 1 MP80xx Image Platform User Manual Version: MP80xx_UM_EN_V1.1.4...
  • Page 3 NOTICE Warning: Ensure that the optional DC adapter works at +5V, especially for the RS-232 interface cable. 1. All software, including firmware, furnished to the user is on a licensed basis. 2. The right is reserved to make changes to any software or product to improve reliability, function, or design.
  • Page 5: Table Of Contents

    Contents NOTICE ..............................i 1 Technical specifications ........................1 2 Cable connector pin-outs descriptions ....................2 3 Default setting for each barcode ......................3 4 Dimensions & Field of view ......................... 4 5 Parts of image platform ........................7 6 Introduction to installation ........................8 6-1 Installation - keyboard wedge ......................
  • Page 6 7-22 UCC/EAN 128 (GS1-128) ......................52 7-23 ISBT 128 ............................. 54 7-24 Code 93 ............................55 7-25 Code 11 ............................56 7-26 MSI/Plessey ..........................58 7-27 UK/Plessey ..........................60 7-28 China Post ..........................61 7-29 China Finance ..........................62 7-30 GS1 DataBar (GS1 DataBar Truncated) ..................64 7-31 GS1 DataBar Limited ........................
  • Page 7: Technical Specifications

    1 Technical specifications Table 1-1 Image platform technical specifications Input voltage 5 VDC ± 0.25V Power 5.00W (working); 0.40W (standby) 1000mA (working); 80mA (standby) Current Image size 1280× 960 pixels Scanning angle ± 60° , ± 40° , 360° (Skew, Pitch, Roll) UPC-A, UPC-E, UPC-E1, EAN-13, EAN-8, ISBN (Bookland EAN), ISSN, Code 39, Code 39 full ASCII, Code 32, Trioptic Code 39, Interleaved 2 of 5, Industrial 2 of 5 (Discrete 2 of 5), Matrix 2 of 5, Codabar (NW7), Code 128,...
  • Page 8: Cable Connector Pin-Outs Descriptions

    2 Cable connector pin-outs descriptions Figure 2-1 Cable connector interface pin-outs The pin-outs descriptions in Table 2-1 apply to the cable connector on the image platform and are for reference only. Table 2-1 Cable connector pin-outs descriptions RS232 Keyboard (PS2) Power (+5V) Power (+5V) Power (+5V)
  • Page 9: Default Setting For Each Barcode

    3 Default setting for each barcode Table 3-1 Default setting for each barcode Min. code Read Check digit Check digit Proprietary Code type length enable verification transmission code ID code ID √ √ √ UPC-A (12) √ √ √ UPC-E √...
  • Page 10: Dimensions & Field Of View

    4 Dimensions & Field of view Figure 4-1 Dimensions (without stand) Figure 4-2 Dimensions (with stand)
  • Page 11 Figure 4-3 Dimensions of hanging holes Figure 4-4 Field of view Figure 4-5 Field of view – Front view...
  • Page 12 Figure 4-6 Field of view – Horizontal Figure 4-7 Field of view – Vertical...
  • Page 13: Parts Of Image Platform

    5 Parts of image platform Figure 5-1 Parts of image platform ① Scan window ② Camera push button ③ LED ④ Beeper push button ⑤ Beeper ⑥ Hanging holes ⑦ USB interface ⑧ Auxiliary interface for handheld scanner, etc ⑨ Host interface...
  • Page 14: Introduction To Installation

    6 Introduction to installation Note: If any of the below operation is incorrect, turn off the power immediately and check the image platform for any improper connections. Go through all steps again. 6-1 Installation - keyboard wedge 1. Switch off the host and unplug the keyboard connector. 2.
  • Page 15: Installation - Rs-232

    6-2 Installation - RS-232 1. Switch off the host. 2. Attach the phone jack connector of the RS-232 cable to Host interface on the image platform. 3. Connect another end of the RS-232 cable to the serial port (PIN 9) on the device. 4.
  • Page 16: Parameter Menus

    7 Parameter menus 7-1 Single-parameter setting by scanning barcodes Important notes: 1. During the process of programming, LED is lighting to indicate the programming correctness. LED will go off if any incorrect programming operation performed. 2. After each successful programming, LED will go off and the image platform will beep twice. 3.
  • Page 17: Operate The Image Platform By Receiving Command Via Uart

    7-2 Operate the image platform by receiving command via UART Note: 1- The information in this chapter is provided for the image platform with RS232 cable or USB cable. 2- If the image platform is with USB cable, the setting of USB device type must be set as “USB virtual COM”.
  • Page 18: Interface Selection

    7-3 Interface selection This image platform supports interfaces such as keyboard wedge, RS-232 serial wedge, and USB interface. In most of the cases, simply selecting an appropriate cable provided by the manufacturer will work for a specific interface. Interface selection: Auto detection- By setting this function, the image platform will automatically detect the keyboard wedge, RS-232 or USB interface for user.
  • Page 19: Keyboard Wedge Interface

    7-4 Keyboard wedge interface Keyboard type: As a keyboard interface, the image platform supports most of the popular PCs and IBM terminals. Keyboard layout: The image platform supports different national keyboard layouts. Commonly an 7-7 Scan appropriate encoding system must be selected. Please refer to Character encoding system of “ mod &...
  • Page 20 Multiple-scan setting Single-scan setting Option barcode Option Alpha. entry IBM AT, PS/2 Keyboard type Apple Mac compatibles Turkish F Turkish Q French Italian Spanish Keyboard layout Slovak Denmark Japanese German Belgian Russian Czech Character encoding system “7-7 Scan mode & Some global settings”...
  • Page 21 Multiple-scan setting Single-scan setting Option barcode Option Alpha. entry 200 us 0 ms 10 ms Delay-after-compound-key 20 ms 40 ms 80 ms Alphabetic key Numeric key Numeric keypad Alt+ keypad Disable Power-on simulation Enable 0 ms 5 ms 10 ms Inter-character delay 20 ms 40 ms...
  • Page 22 Multiple-scan setting Single-scan setting Option barcode Option Alpha. entry Enable Disable Caps Lock override Enable...
  • Page 23: Rs-232 Interface

    7-5 RS-232 interface Flow control: None-The communication only uses TxD and RxD signals without any hardware or software handshaking protocol. RTS/CTS- If the image platform wants to send the barcode data to host computer, it will issue the RTS signal first, wait for the CTS signal from the host computer, and then perform the normal data communication.
  • Page 24 Multiple-scan setting Single-scan setting Option barcode Option Alpha. entry 00-99 Response delay 00-99 (100 ms) 1200 2400 4800 Baud rate 9600 19200 38400 57600 115200 None Parity bit Even 8 bits Data bit 7 bits One bit Stop bit Two bits...
  • Page 25: Usb Interface

    7-6 USB interface USB device type: HID keyboard– By setting, the image platform is used as a USB HID keyboard emulation device. The “7-4 Keyboard wedge keyboard layout setting follows the setting of keyboard layout in the chapter of interface” USB virtual COM–...
  • Page 26 Multiple-scan setting Single-scan setting Option barcode Option Alpha. entry HID keyboard HID keyboard for Apple Mac USB device type USB virtual COM Simple COM Port Emulation Turkish F Turkish Q French Italian Spanish Keyboard layout Slovak Denmark Japanese German Belgian Russian Czech Character encoding system...
  • Page 27 Multiple-scan setting Single-scan setting Option barcode Option Alpha. entry 20 ms 40 ms 60 ms Alphabetic key Numeric key Numeric keypad Alt+ keypad...
  • Page 28: Scan Mode & Some Global Settings

    7-7 Scan mode & Some global settings Scan mode: Good-read off- The Camera push button can be pressed once to activate scanning. The image platform stops scanning when there is a successful reading or no code is decoded after the Stand-by duration elapsed.
  • Page 29 Alphanumeric character only- If this option is selected, the image platform will output the alphanumeric characters only, i.e. “A”-“Z”, “a”-“z”, “0”-“9”. Decoder optimization: If it is enabled, the image platform will optimize the decoder with error correction. This function is not effective for all types of barcode. Data output delay in continue-scan mode: If it is enabled, in the continue-scan mode, the image platform can store the data while continue-scanning.
  • Page 30 Multiple-scan setting Single-scan setting Option barcode Option Alpha. entry Good-read off Scan mode Continue Timeout off Auto-detection sensitivity 30 seconds 1 minute 1 minute and 30 seconds 2 minutes Standby duration 5 minutes 7 minutes 10 minutes 15 minutes...
  • Page 31 Multiple-scan setting Single-scan setting Option barcode Option Alpha. entry 20 minutes 30 minutes 45 minutes 60 minutes 00-FF Same barcode delay time 00-FF (50 ms) 00-09 Double confirm 00-09 (00: no ) 04-99 Global max. code length 04-99 01-99 Global min. code length 01-99 00-66 Global G1-G6 string selection...
  • Page 32 Multiple-scan setting Single-scan setting Option barcode Option Alpha. entry Data output delay in 00-FF 00-FF (100 ms) continue-scan mode FF (Never) ASCII Character encoding system UTF-8 Windows-1251 Complete data output before Disable next decode attempt Enable...
  • Page 33: Led And Beeper Indication

    7-8 LED and Beeper Indication Power on alert: After power-on the image platform will generate an alert signal to indicate a successful self-test. LED indication: After each successful reading, the LED above the image platform will light up to indicate a good barcode reading.
  • Page 34 Multiple-scan setting Single-scan setting Option barcode Option Alpha. entry Disable Power on alert Enable Disable LED indication Enable Disable Beeper indication Enable 01-09 Beep tone duration 01-09 (10 ms ) Volume of beeper Middle High Type 1 Type 2 Beeper Tone Type 3 Type 4 Type 5...
  • Page 35: Led Illumination Level

    7-9 LED illumination level LED illumination level: Illumination does aid image platform to get better quality images. The effectiveness of the illumination decreases as the distance to the target increases. Multiple-scan setting Single-scan setting Option barcode Option Alpha. Entry LED illumination level Middle High...
  • Page 36: Multi-Symbols Read

    7-10 Multi-symbols read Multi-symbols read: By setting Enable, the image platform allows to read multiple symbols in one image. By setting Disable, the image platform will only read the symbol closest to the center area in the image. Multiple-scan setting Single-scan setting Option barcode Option...
  • Page 37: Upc-A

    7-11 UPC-A Read: Format System character Data digits (10 digits) Check digit (1 digit) Check digit verification: The check digit is optional. Check digit trans.: By setting Enable, check digit will be transmitted. Code ID setting: Code ID is a one-or-two-character string used to represent the symbol upon a succeeding reading.
  • Page 38 Multiple-scan setting Single-scan setting Option barcode Option Alpha. entry Disable Read Enable Disable Check digit verification Enable Disable Check digit trans. Enable 00-FF Code ID setting 00-FF (ASCII) <A>* 00-66 Insert group selection 00-66 None 2 digits Supplement digits 5 digits 2 or 5 digits None Truncate leading zeros...
  • Page 39: Upc-E

    7-12 UPC-E Read: Format System character “0” Data digits (6 digits) Check digit (1 digit) Check digit verification: The check digit is optional and made as the sum of the numerical value of the data digits. Check digit trans.: By setting Enable, check digit will be transmitted. “7-11 UPC-A”...
  • Page 40 Multiple-scan setting Single-scan setting Option barcode Option Alpha. entry Disable Read Enable Disable Check digit verification Enable Disable Check digit trans. Enable 00-FF Code ID setting 00-FF (ASCII) <D>* 00-66 Insert group selection 00-66 None 2 digits Supplement digits 5 digits 2 or 5 digits None Truncate leading zeros...
  • Page 41: Upc-E1

    7-13 UPC-E1 Read: Format System character “1” Data digits (6 digits) Check digit (1 digit) Check digit verification: The check digit is optional and made as the sum of the numerical value of the data digits. Check digit trans.: By setting Enable, check digit will be transmitted. “7-11 UPC-A”...
  • Page 42 Multiple-scan setting Single-scan setting Option barcode Option Alpha. entry Disable Read Enable Disable Check digit verification Enable Disable Check digit trans. Enable 00-FF Code ID setting 00-FF (ASCII) <D>* 00-66 Insert group selection 00-66 None 2 digits Supplement digits 5 digits 2 or 5 digits None Expand to EAN-13...
  • Page 43: Ean-13 (Isbn/Issn)

    7-14 EAN-13 (ISBN/ISSN) Read: Format Data digits (12 digits) Check digit (1 digit) Check digit verification: The check digit is optional and made as the sum of the numerical value of the data digits. Check digit transmission: By setting Enable, check digit will be transmitted. “7-11UPC-A”...
  • Page 44 Multiple-scan setting Single-scan setting Option barcode Option Alpha. entry Disable Read Enable Disable Check digit verification Enable Disable Check digit transmission Enable 00-FF EAN-13 code ID setting 00-FF (ASCII) <A>* 00-66 Insert group selection 00-66 None 2 digits Supplement digits 5 digits 2 or 5 digits Disable...
  • Page 45: Ean-8

    7-15 EAN-8 Read: Format Data digits (7 digits) Check digit (1 digit) Check digit verification: The check digit is optional and made as the sum of the numerical value of the data digits. Check digit trans.: By setting Enable, check digit will be transmitted. “7-11 UPC-A”...
  • Page 46 Multiple-scan setting Single-scan setting Option barcode Option Alpha. entry Disable Read Enable Disable Check digit verification Enable Disable Check digit trans. Enable 00-FF Code ID setting 00-FF (ASCII) <C>* 00-66 Insert group selection 00-66 None 2 digits Supplement digits 5 digits 2 or 5 digits None Truncation/Expansion...
  • Page 47: Code 39 (Code 32, Trioptic Code 39)

    7-16 Code 39 (Code 32, Trioptic Code 39) Read: Format Start character(*) Data digits (variable) Check digit (1 digit, optional) End character(*) Check digit verification: The check digit is optional and made as the sum module 43 of the numerical value of the data digits.
  • Page 48 Multiple-scan setting Single-scan setting Option barcode Option Alpha. entry Disable Read Enable Disable Check digit verification Enable Disable Check digit transmission Enable 00-99 Max. code length 00-99 00-99 Min. code length 00-99 00-FF Code ID setting 00-FF (ASCII) <M>* 00-66 Insert group selection 00-66 Standard...
  • Page 49 Multiple-scan setting Single-scan setting Option barcode Option Alpha. entry Enable Disable Code 32 Prefix “A” transmission Enable Disable Trioptic Code 39 read Enable Trioptic Code 39 Start/End Disable transmission Enable...
  • Page 50: Interleaved 2 Of 5

    7-17 Interleaved 2 of 5 Read: Format Data digits (Variable) Check digit (1 digit, optional) Check digit verification: The check digit is made as the sum module 10 of the numerical values of all data digits. There are two optional check digit algorithms: the specified Uniform Symbol Specification (USS) and the Optical Product Code Council (OPCC).
  • Page 51 Multiple-scan setting Single-scan setting Option barcode Option Alpha. entry Disable Read Enable Disable Check digit verification OPCC Disable Check digit transmission Enable 00-99 Max. code length 00-99 00-99 Min. code length 00-99 00-FF Code ID setting 00-FF (ASCII) <I>* 00-66 Insert group selection 00-66...
  • Page 52: Industrial 2 Of 5 (Discrete 2 Of 5)

    7-18 Industrial 2 of 5 (Discrete 2 of 5) Read: Format Data digits (variable) “7-16 Code 39(Code 32, Trioptic Code 39)” Max./Min. code length: Refer to Max./Min. code length of “7-11 UPC-A” Code ID setting: Refer to Code ID setting of “7-11 UPC-A”...
  • Page 53: Matrix 2 Of 5

    7-19 Matrix 2 of 5 Read: Format Data digits (variable) Check digit (1 digit, optional) Check digit verification: The check digit is made as the sum module 10 of the numerical values of all data digits. Check digit transmission: By setting Enable, check digit will be transmitted. “7-16 Code 39(Code 32, Trioptic Code 39)”...
  • Page 54: Codabar

    7-20 Codabar Read: Format Start Data digits (variable) Check digit (1 digit, optional) Check digit verification: The check digit is made as the sum module 16 of the numerical values of all data digits. Check digit transmission: By setting Enable, check digit will be transmitted. “7-16 Code 39(Code 32, Trioptic Code 39)”...
  • Page 55 Multiple-scan setting Single-scan setting Option barcode Option Alpha. entry 00-66 Insert group selection 00-66 ABCD/ABCD abcd/abcd Start/End type ABCD/TN*E abcd/tn*e Disable Start/End transmission Enable Disable Start/End character equality Enable...
  • Page 56: Code 128

    7-21 Code 128 Read: Format Data digits (variable) Check digit (1 digit, optional) Check digit verification: The check digit is made as the sum module 103 of all data digits. Check digit transmission: By setting Enable, check digit will be transmitted. “7-16 Code 39(Code 32, Trioptic Code 39)”...
  • Page 57 Multiple-scan setting Single-scan setting Option barcode Option Alpha. entry Disable Read Enable Disable Check digit verification Enable Disable Check digit transmission Reserved 00-99 Max. code length 00-99 00-99 Min. code length 00-99 00-FF Code ID setting 00-FF (ASCII) <K>* 00-66 Insert group selection 00-66 Disable...
  • Page 58: Ucc/Ean 128 (Gs1-128)

    7-22 UCC/EAN 128 (GS1-128) UCC/EAN 128 and GS1-128 are the same kind of barcode symbols with same standard. Read: Format Data digits (variable) Check digit (1 digit, optional) Check digit verification: The check digit is made as the sum module 103 of all data digits. Check digit transmission: By setting Enable, check digit will be transmitted.
  • Page 59 Multiple-scan setting Single-scan setting Option barcode Option Alpha. entry Disable Read Enable Disable Check digit verification Enable Disable Check digit transmission Reserved Max. code length 00-99 00-99 Min. code length 00-99 00-99 Code ID setting 00-FF 00-FF (ASCII) <K>* Insert group selection 00-66 00-66 Disable...
  • Page 60: Isbt 128

    7-23 ISBT 128 Read: Format “=” or “&” Data digits (variable) Check digit (1 digit, optional) Check digit verification: The check digit is made as the sum module 103 of all data digits. Check digit transmission: By setting Enable, check digit will be transmitted. “7-16 Code 39(Code 32, Trioptic Code 39)”...
  • Page 61: Code 93

    7-24 Code 93 Read: Format Data digits (variable) Check digits (2 digits, optional) Check digit verification: The check digit is made as the sum module 47 of the numerical values of all data digits. Check digit transmission: By setting Enable, check digit will be transmitted. “7-16 Code 39(Code 32, Trioptic Code 39)”...
  • Page 62: Code 11

    7-25 Code 11 Read: Format Data digits (variable) Check digit 1 (optional ) Check digit 2 (optional) Check digit verification: The check digit is presented as the sum module 11 of all data digits. Check digit transmission: By setting Enable, check digit 1 and check digit 2 will be transmitted upon your selected check digit verification method.
  • Page 63 Multiple-scan setting Single-scan setting Option barcode Option Alpha. entry Disable Read Enable Disable One digit Check digit verification Reserved Reserved Disable Check digit transmission Enable 00-99 Max. code length 00-99 00-99 Min. code length 00-99 00-FF Code ID setting 00-FF (ASCII) <V>* 00-66...
  • Page 64: Msi/Plessey

    7-26 MSI/Plessey Read: Format Data digits (variable) Check digit 1 (optional) Check digit 2 (optional) Check digit verification: The MSI/Plessey has one or two optional check digits. There are three methods of verifying check digits, i.e. Mod10, Mod10/10 and Mod 11/10. The check digit 1 and check digit 2 will be calculated as the sum module 10 or 11 of the data digits.
  • Page 65 Multiple-scan setting Single-scan setting Option barcode Option Alpha. entry Disable Read Enable Disable 1 digit (mod 10) Check digit verification Reserved Reserved Disable Check digit transmission Enable 00-99 Max. code length 00-99 00-99 Min. code length 00-99 00-FF Code ID setting 00-FF (ASCII) <O>*...
  • Page 66: Plessey

    7-27 UK/Plessey Read: Format Data digits (variable) Check digits (2 digits, optional) Check digit verification: The UK/Plessey has one or two optional check digits. The check digit 1 and check digit 2 will be calculated as the sum module 10 or 11 of the data digits. Check digit transmission: By setting Enable, check digit will be transmitted.
  • Page 67: China Post

    7-28 China Post Read: Format Data digits (11 digits) “7-16 Code 39(Code 32, Trioptic Code 39)” Max. /Min. code length: Refer to Max./Min. code length of The code length of China Post is 11. “7-11 UPC-A” Code ID setting: Refer to Code ID setting of “7-11 UPC-A”...
  • Page 68: China Finance

    7-29 China Finance Note: This type of barcode is not Omni-directionally decodable. The encodable character set includes numeric 0 to 9. Among the symbol of 0 to 9, 0 and 2, 4 and 9, 5 and 8, 6 and 7, have the symmetrical pattern;...
  • Page 69 Multiple-scan setting Single-scan setting Option barcode Option Alpha. entry Only 6 converted to B Only 7 converted to C Only 8 converted to D Only 9 converted to E Disable Assigned to 0 Assigned to 5(A) Assigned to 6(B) Assigned to 7(C) Leading character assignment Assigned to 8(D) Assigned to 9(E)
  • Page 70: Gs1 Databar (Gs1 Databar Truncated)

    7-30 GS1 DataBar (GS1 DataBar Truncated) GS1 DataBar Truncated is structured and encoded the same as the standard GS1 DataBar format, except its height is reduced to a 13 modules minimum; while GS1 DataBar should have a height greater than or equal to 33 modules. Read: Format Data digits (16 digits)
  • Page 71: Gs1 Databar Limited

    7-31 GS1 DataBar Limited Read: Format Data digits (16 digits) “7-11 UPC-A” Code ID setting: Refer to Code ID setting of “7-11 UPC-A” Insertion group selection: Refer to Insertion group selection of “7-30 GS1 DataBar (GS1 DataBar Truncated)” Conversion: Refer to Conversion of Multiple-scan setting Single-scan setting Option barcode...
  • Page 72: Gs1 Databar Expanded

    7-32 GS1 DataBar Expanded Read: Format Data characters (variable) “7-11 UPC-A” Code ID setting: Refer to Code ID setting of “7-11 UPC-A” Insertion group selection: Refer to Insertion group selection of Conversion: “7-35 String transmission” UCC/EAN 128- Refer to Code ID transmission of , ]Cm will be identified as AIM ID.
  • Page 73: G1-G6 & C1-C3 & Fn1 Substitution String Setting

    7-33 G1-G6 & C1-C3 & FN1 substitution string setting Format of barcode data transmission Prefix Code name Preamble Code ID Code length Code data Code ID Postamble Suffix Suffix string setting: The <enter > key is represented in different ASCII when it is applied by different OS. For a Windows/DOS OS, <enter>...
  • Page 74 Testing barcode: FN1 substitution string setting: The FN1 character (0x1D) in an UCC/EAN128 barcode, or a Code 128 barcode, or a GS1 DataBar barcode can be substituted with a defined string. Truncate leading G5 string setting: By setting, a defined leading character or string can be truncated. Also a single character can be un-defined.
  • Page 75 Testing barcode: Multiple characters C3 replacement: By setting, a number of defined characters in the data string can be replaced by other defined characters. The maximum number of characters to replace is 11. Example: Replace all the “A” character in a data string with “B” character; replace “C” with “D”; replace “E”...
  • Page 76 Multiple-scan setting Single-scan setting Option barcode Option Alpha. Entry 0-22 characters 00-FF Prefix string setting None Suffix string setting 0-22 characters 00-FF <ENTER> 0D0A* 0-22 characters 00-FF Preamble string setting None Postamble string setting 0-22 characters 00-FF None 0-22 characters 00-FF Insert G1 string setting None...
  • Page 77 Multiple-scan setting Single-scan setting Option barcode Option Alpha. Entry Once Repeat of a G5 character setting Defined times 01-22 Un-defined times (All) A un-defined character Truncate ending G6 string setting 1-22 defined characters 01-7F <0> Once Repeat of a G6 character setting Defined times 01-22 Un-defined times (All)
  • Page 78: G1-G4 String Position & Code Id Position

    7-34 G1-G4 string position & Code ID position Format of barcode data transmission Prefix Code name Preamble Code ID Code length Code data Code ID Postamble Suffix Insert G1/G2/G3/G4 string position: The image platform offers 4 positions to insert strings among the symbol.
  • Page 79: String Transmission

    7-35 String transmission Note: The information in this chapter is closely related to the chapter of String setting. Format of barcode data transmission Prefix Code name Preamble Code ID Code length Code data Code ID Postamble Suffix Prefix transmission: By setting Enable, prefix will be appended before the data transmitted. Suffix transmission: By setting Enable, suffix will be appended after the data is transmitted.
  • Page 80 Multiple-scan setting Single-scan setting Option barcode Option Alpha. entry Disable Prefix transmission Enable Suffix transmission Disable Enable Disable Code name transmission Enable Preamble transmission Disable Enable Disable Postamble transmission Enable Disable Code ID transmission Proprietary ID AIM ID Code length transmission Disable Enable Disable...
  • Page 81 Multiple-scan setting Single-scan setting Option barcode Option Alpha. entry Keyboard wedge/USB RS-232 Keyboard wedge / USB / RS-232 All-non-printable-character string Disable transmission with string setting Enable Transmit the first N data characters only 01-99 Transmit the last N data characters only 01-99...
  • Page 82: Test Barcode Symbols

    8 Test barcode symbols UPC-A UPC-E UPC-E1 EAN-8 EAN-13 Code 39 Code 32 A908765439 Code 128 Interleaved 2 of 5 Industrial 2 of 5 (Default setting: Read disable) Matrix 2 of 5 Code 93...
  • Page 83 UCC/EAN 128 Code 11 (Default setting: Read disable) MSI/Plessey (Default setting: Read disable) UK/Plessey ISBN/ISSN China Post GS1 DataBar (GS1 DataBar Truncated) 0112345678901231 GS1 DataBar Limited 0109876543210128 GS1 DataBar Expanded...
  • Page 84: Maintenance

    9 Maintenance Cleaning the scan window is the only maintenance required. A dirty window may affect scanning accuracy. Do not allow any abrasive material to touch the window. Remove any dirt particles with a damp cloth. Wipe the window using a tissue moistened with water. Do not spray water or other cleaning liquids directly into the window.
  • Page 85: Assembling The Stand

    10 Assembling the stand Figure 10-1 Figure 10-2 Figure 10-3 Figure 10-4 As shown in Figure 10-1, plug in two connection-arms to the two associated notches on the bottom of the image platform. As shown in Figure 10-2, well connect the image platform with the stand by tightening the single screw.
  • Page 86: Ascii Table

    11 ASCII Table for keyboard wedge for RS-232 Null Down Left Right PgUp PgDn Home Enter Insert Ctrl+ Delete Alt+ Notes: The 2nd and the 3rd columns above are used for keyboard wedge only. “ & ‘ < > Example: ASCII “A” = “41”.
  • Page 87: Barcode Representing Non-Printable Character

    12 Barcode representing non-printable character Notes to make the following barcode: 1. According to different barcode printing software, the method of printing following barcode is different. 2. If using CODESOFT software, firstly read the information through “Help→Index→Code128→Special input syntax”. Also refer to ASCII table. For example, if we wish to make “F1” barcode, select “code128”, then select “CODE A”...
  • Page 88: Return Default Parameters & Firmware Version

    13 Return default parameters & firmware version WARNING: Default value initialization If you wish to return the image platform to all the factory default settings, scan the barcode above. Firmware version list If you wish to display the firmware version, scan the barcode above.
  • Page 89: Configuration Alphanumeric Entry Barcode

    14 Configuration alphanumeric entry barcode...

Table of Contents