Advertisement
USB-C™ Gen 2 to 2.5" SATA SSD Adapter
Installation Instructions
• Connect a 2.5" SATA drive to the Adapter
• Format the drive, if necessary
• Plug the Adapter into a USB-C port
• Safely eject the drive from the computer before uplugging
Troubleshooting Tips
• Caution! Handle SATA drives carefully to avoid damage
• Data transfer speed is limited by the USB-C port and SSD drive
• 3.5" HDD drives are not compatible
• Review the SSD documentation for drive formatting instructions
Technical Specifications
• Host Connector: USB-C Male
• Drive Connector: SATA 7+15 Pin Receptacle
• Hard Drive Support: 2.5" SATA I, II, III SSD/HDD
• Cable Rating: USB Type-C 3.1 Gen 2
• Adapter Length: 10 Inches
• Power: USB bus-powered
• OS Independent
• Warranty: Limited One-Year
Contact support@cablema�ers.com for ques�ons
Advertisement
