Pair The Earphones With Your; Pair The Earphones With Another Bluetooth Device - Philips 1000 Series User Manual

Pair the earphones with
your Bluetooth device
for the rst time
Make sure that the earphones are
fully charged.
Auto power on: open the top cover
from charging box, the earpieces
discharged and the blue LED
indicator ashes for 3 times with
"power on" voice prompt;
Manual power on: on both
earpieces press and hold the
multi-function buttons for approx-
inmately 3s.
The right earpiece LED ashes
alternately in white and blue,
and the left earpiece LED is o
for 10s and the blue LED ashes
once.
Both earpieces are now
powerd on and are paired with
each other.
The earpieces are now in
pairing mode and are ready to
pair with a Bluetooth device
(e.g. a mobile phone)
Blue LED
ashes once
for 10s
LED ashes
alternately in
white and blue
Turn on the Bluetooth function of
your Bluetooth device.
Pair the earpieces with your
Bluetooth device. Refer to the user
manual of your Bluetooth device.
In right earpiece, it has voice
"Connected" and LED goes o
on both earpieces and ash
once every 10s. You can use
your device to play music or
make calls.
Note
 After powering on, if the earphones cannot
nd any previously connected Bluetooth
device, it will automatically switch to pairing
mode.
The following example shows you how
to pair the earphones with your Blue-
tooth device.
Turn on the Bluetooth function of
your Bluetooth device, select Philips
TAT1215.
Enter the earphones password
"0000" (4 zeros) if prompted. For
those Bluetooth devices featuring
Bluetooth 3.0 or higher, no need to
enter a password.
Philips TAT1215