Get Started; Charge The Battery; Bluetooth Device For The Rst Time - Philips 1000 Series User Manual

3 Get started

Charge the battery

Note
 Before you use your earphones for the rst
time, place the earpieces in the charging box
and charge the battery for 2 hours for
optimum battery capacity and lifetime.
 Use only the original USB charging cable to
avoid any damage.
 Finish your call before charging the earpieces,
as connecting the earpieces for charging will
power the earpieces o .
Charging
Connect one end of the USB cable into
the charging box, and another end into
the power source.
The charging box starts charging.
• Charging process is veri ed by the
LED light. The red light ashes on
the front panel.
• When the charging box is fully
charged, the red light goes on.
Tip
 The charging box serves as a portable backup
battery for charging the earpieces.
Earpieces
Place the earpieces in the charging
case.
The earpieces starts charging.
• Charging process is veri ed by white
LED light on the earpieces.
• When the earpieces is fully charged,
the white light goes o .
 Normally, a full charge takes 2 hours (for the
earpieces or charging case).
L R