Advertisement
Congratulations on your purchase, and welcome to Philips!
To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. With this Philips True wireless earphones, you can:
Register your product and get support at www.philips.com/support
Philips True wireless earphones Philips TAT2206
Replaceable rubber ear caps x 3 pairs
USB-C charging cable (for charging only)
Quick start guide
Global Warranty
Safety leaflet
A mobile phone or device (e.g. notebook, tablet, Bluetooth adapters, MP3 players etc) which supportsBluetooth and is compatible to the earphones (see 'Technical data').
![]() | |
|
Connect one end of the USB cable into the charging box, and another end into the power source.
The charging box starts charging.
![]() | |
|
The LED on both earphones flash in white & blue alternately.
The earphones are now in pairing mode and is ready to pair with a Bluetooth device (e.g. a mobile phone)
![]() | |
|
The following example shows you how to pair the earphones with your Bluetooth device.
Take either right or Left earpiece out from charging box for Mono use. The earpiece will power on automatically. There will be a voice "Power on" from earpiece.
![]() | |
|
If you have another Bluetooth device that you want to pair with the earphones, make sure the Bluetooth function in any other previously paired or connected devices are turned off. Press and hold over 5 seconds both left & right side simultaneously with earpiece on ear, release when Pairing voice prompt is heard.
![]() | |
|
The blue LED flashes.
The earphones will search the last connected Bluetooth device and reconnect to it automatically. If the last connected device is not available, the earphones will enter pairing mode.
![]() | ||||
|
![]() | |
|
Task | Multifunction button | Operation |
Turn the earphones on | Open charging case's lid | |
Turn the earphones off | Earpiece put back to charging box and close the lid |
Music control
Task | Multifunction button | Operation |
Play or pause music | Right / Left earpiece | Single tap |
Skip forward | Right / Left earpiece | Double taps |
Skip backward | Right / Left earpiece | Triple taps |
Adjust volume +/- | Via mobile phone control |
Call control
Task | Multifunction button | Operation |
Pick up/ Hang up Call | Right / Left earpiece | single tap |
Reject an incoming call | Right / Left earpiece | Tap and hold |
Switch call during 3-way call | Right / Left earpiece | triple taps |
Headphones status | Indicator |
The earphones are connected to a Bluetooth device | Blue LED ashes |
The earphones are ready for pairing | The blue & white LED ash alternately |
The earphones are on but not connected to a Bluetooth device | White LED blink every 1s (auto turn o after 3min) |
Low battery level (earphones) | Blue LED blink 2x every 5s |
Battery is fully charged (charging box) | LED will be off |
When charging | Indicator |
Battery low | Amber LED light up |
Relative adequate battery | Off |
In use and cover is open | Indicator |
Battery low | Amber LED light up |
Relatively adequate battery | White LED light up |
Task | Button | Operation |
Trigger voice (Siri/Google) assistant | Right / Left earpiece | Tap and hold 2 seconds |
If you encounter any pairing or connection issue, you can follow the following procedure to reset your heaset.
![]() | |
|
Hereby, MMD Hong Kong Holding Limited declares that the product is in compliance with the essential requirements and other relevant provisions of RED Directive 2014/53/EU and UK Radio Equipment Regulations SI 2017 No 1206. You can find the Declaration of Conformity on www.philips.com/support.
Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.
This symbol on a product means that the product is covered by European Directive 2012/19/EU.
This symbol means that the product contains a built-in rechargeable battery covered by European Directive 2013/56/EU which cannot be disposed of with normal household waste. We strongly advise you to take your product to an official collection point or a Philips service centre to have a professional remove the rechargeable battery. Inform yourself about the local separate collection system for electrical and electronic products and rechargeable batteries. Follow local rules and never dispose of the product and rechargeable batteries with normal household waste. Correct disposal of old products and rechargeable batteries helps prevent negative consequences for the environment and human health.
If there is no collection/recycling system for electronic products in your country, you can protect the environment by removing and recycling the battery before disposing the headphones.
This product complies with all applicable standards and regulations regarding exposure to electromagnetic fields.
All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet.) Your system consists of materials which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.
The device complies with the FCC rules, Part 15. Operation is subject to the following two conditions:
FCC rules
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Canada:
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic
Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions:
CAN ICES-003(B)/NMB-003(B)
IC Radiation Exposure Statement:
This equipment complies with Canada radiation exposure limits set forth for uncontrolled environments. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Bluetooth
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by MMD Hong Kong Holding Limited is under license. Other trademarks and trade names are those of their respective owners.
Siri
Siri is a trademark of Apple Inc., registered in the U.S. and other countries.
Google
Google and Google Play are trademarks of Google LLC.
My Bluetooth earphones do not turn on.
The battery level is low. Charge the earphones.
I cannot pair my Bluetooth earphones with my Bluetooth device.
The Bluetooth is disabled. Enable the Bluetooth feature on your Bluetooth device and turn on the Bluetooth device before you turn on the earphones.
Pairing does not work.
The Bluetooth device cannot find the earphones.
My Bluetooth earphones are connected to a Bluetooth stereo enabled mobile phone, but music only plays on the mobile phone speaker.
Refer to the user manual of your mobile phone. Select to listen to music through the earphones.
The audio quality is poor and crackling noise can be heard.
The audio quality is poor when streaming from the mobile phone is very slow, or audio streaming does not work at all.
Make sure your mobile phone not only supports (mono) HSP/HFP but also supports A2DP and is BT4.0x (or higher) compatible (see 'Technical data')
My Bluetooth earphones won't pair and won't respond.
Clean your headphones regularly.
Charge your headphones regularly.
If the headset is not used for a long time, the rechargeable battery will begin to lose its charge. To avoid this loss, please fully charge the battery at least once every three months.
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Thank you! Your question has been received!
Need Assistance?
Do you have a question about the TAT2206 that isn't answered in the manual? Leave your question here.