Get Started; Charge The Battery; Pair The Headphones With Your Mobile Phone - Philips Fidelio L3/00 User Manual

Table of Contents

Advertisement

3 Get started

Charge the battery

Note
 Before you use your headphones for the rst
time, charge the battery for 2 hours for
optimum battery capacity and lifetime.
 Use only the original USB charging cable to
avoid any damage.
 Finish your call before charging the
headphones, as connecting the headphones
for charging will power the headphones o .
Connect the supplied USB charging
cable to:
The USB type C charging slot on the
headphones and;
The charger/USB port of a
computer.
LED turns white during charging and
turns o when the headphones are
fully charged.
Tip
 Normally, a full charge takes 2 hours.
Pair the headphones with
your mobile phone
Before you use the headphones with
your mobile phone for the rst time, pair
it with a mobile phone. A successful
pairing establishes a unique encrypted
link between the headphones and
mobile phone. The headphones store
the last 8 devices in the memory. If you
try to pair more than 8 devices, the
earliest paired device is replaced by the
new one.
Make sure that the headphones are
fully charged and turned o .
Press and hold
the blue and white LED ashes
alternately.
The headphone remain in pairing
mode for 3 minutes.
Make sure that the mobile phone is
turned on and its Bluetooth feature
is activated.
Pair the headphones with the mobile
phone. For detailed information,
refer to the user manual of your
mobile phone.
The following example shows you how
to pair the headphones with your mobile
phone.
Activate the Bluetooth feature of
your mobile phone, select Philips
Fidelio L3
Philips Fidelio L3
for 5 seconds until

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fidelio l3

Table of Contents